Rocklin and Sacramento Auto Repair

If your windshield wipers are streaking and chattering when you turn them on in the rain or snow, it's time for a little "blade renewal." And when it comes to new wiper blades, there are some new designs that are worth a look. One of the latest is called the beam blade.  It's different than conventional blades you might be used to.  Instead of a metal frame and a rubber blade that slides in the frame on a track, the beam blades have an enclosed spring-steel band that allows the rubber wiper to conform to the windshield glass shape much more tightly.  There are some key advantages to beam blades, which is why many vehicle manufacturers are making them standard on their latest models.  For one thing, they work well in all weather conditions, including the heat of summer and the icy, snowy cold of winter.  Since there is no separate frame, snow and ice can't form in gaps like conventional wipers and prevent the blade from clearing your windshield.  Many beam ... read more

You may remember a song that went, "Objects in the rearview mirror may appear closer than they are." While that was a song about life's lessons, there are a few things we should all know about how important rearview mirrors are to safe driving. While new electronic devices are helping drivers be aware of surrounding traffic in high-tech ways, the good old rearview mirror is still a dependable way of letting you know what's around you.  There are usually 3 on each vehicle, 1 attached to the windshield inside and 2 attached outside on each of the front doors. It's important that they be adjusted properly before you start driving (not while you're driving). Experts say the windshield rearview mirror should cover the area behind the vehicle while the outside mirrors should not simply duplicate that view but extend it to the sides, where blind spots normally are. Your rearview mirrors must be able to hold the positions they're adjusted in; it there's play in them or they move around, y ... read more

Automatic transmissions rule. The old days of shifting your own gears are a thing of the past for most drivers.  But automatic transmission trouble can be a big inconvenience for any driver if it comes at the wrong time in the wrong place.  Here are some signs to look out for that may mean you are having transmission issues. When you are driving, your vehicle seems to slip in an out of gear without you touching anything.  That's what some call, not surprisingly, a "slipping transmission."  When your vehicle shifts from one gear to the next, you hear a loud "clunk." Transmissions are supposed to be nearly silent when they shift, so that noise is telling you something is wrong.  If you notice there's a puddle of some fluid under your vehicle, your transmission could be leaking fluid.  Try to figure out what color it is (try putting a piece of cardboard underneath to capture some of the fluid).  If it is red or brown, that's a sign it could be transmissi ... read more

There are some boots that don't come in a shoe box and aren't worn on your feet.  They are called axle or CV boots, and they can be important parts for many vehicles. That CV stands for constant velocity.  CV axles are mainly used in front-wheel drive and all-wheel drive vehicles. They're also used in some rear-wheel drive vehicles with independent suspensions.  They have two CV joints, one inner and one outer, placed between the axle and the drive wheels.  That way the vehicle's engine power can drive the wheels, no matter what angle they are.  They also adjust for the different speeds wheels turn as they go around corners.  Because roads are full of all sorts of hazards (dirt, oil, water, grime), these CV joints need to be protected.  They also have grease in them to keep the bearings moving smoothly.  That's the job of the rubber boots that are supposed to keep that debris out.  These CV or axle boots are made of rubber or plastic and usu ... read more

It's bad enough in cold weather when ice and snow block your visibility.  Add to that fog on the inside of your windows and you could be driving blind.  So here are a few tips on how to keep your windows from fogging up when there's a chill in the air. You probably know fog is really condensation, when moist, warm air meets a cold surface and turns to liquid.  If your windshield fogs up, you probably turn on your windshield defroster. Most defrosters blow heated air on the windshield glass to warm it up so it won't condense the moisture.  Many also turn on the air conditioning to reduce the moisture.  That same strategy can work on the rest of the windows.  First, turn up your heater's temperature setting.  The hotter the air, the more moisture it will hold.  Also, turn off the "recirculating" setting since you want all outside air to come in. Then switch on the air conditioning.  It will remove the moisture from the outside  air that i ... read more